Epson Stylus Pro 7700 Network Guide - Page 13

3. Check if the following network components are in the list. If they are already installed, go to "Connecting the Network Interface to the Network" on page 16. The following table lists the network components required for configuring the network interface with EpsonNet Config. EpsonNet Config's setting screens TCP/IP, SNMP (IP trap) Necessary components Internet Protocol (TCP/IP) The following table lists the network components required for network printing. Printing method LPR printing Necessary components Internet Protocol (TCP/IP) 4. If the necessary components are not in the list, click Install to install them. 5. Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area Connection Properties dialog box to open the Internet Protocols Version 4 (TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask, etc. and then click OK. 6. Restart the computer. Setting Up Your System for Network Printing 13