Epson SureColor F7070 Network Guide - Page 9

Large format inkjet printers (Models that do not support 1000 Mbps communication) Status light Green Green Red Red Data light Yellow Yellow (Flashing) Yellow Yellow (Flashing) Network Status Ready (10 M link) Receiving packets (10 M link) Ready (100 M link) Receiving packets (100 M link) Large format inkjet printers (Models that support 1000 Mbps communication) Status light Red Red Green Green Data light Yellow Yellow (Flashing) Yellow Yellow (Flashing) Network Status Ready (100 M link) Receiving packets (100 M link) Ready (1000 M link) Receiving packets (1000 M link) Network connector RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this cable for 10Base-T, 100Base-TX, and 1000Base-T Ethernet. Important: You must use the following shielded twisted-pair cable to connect the network interface to a network. O Category-5 or higher for the 10Base-T or 100Base-TX connection O Category-6 or higher for the 1000Base-T connection About the Software The Software Disc provided with your printer includes the following network software. Note: The software provided varies depending on your printer model. Introduction 9