Epson T7270 User Manual - Page 143
Margin Options, Description
View all Epson T7270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Epson SureColor T-Series User's Guide Using the Control Panel Menu Item Output Size Description Auto* The hard clip area of the PS command of the data becomes the base output size. The actual output size depends on the Margin Options setting. When the data does not contain a PS command, the smallest rectangle area of in the following illustration including the print object becomes the base output size. Margin A Series/US-ANSI/US -ARCH/B Series/Photo Series/Others User Defined Choose the base output size from the compatible standard sizes. The actual output size depends on the Margin Options setting. For a cut sheet, this setting is available only when the data does not contain a PS command. If the data contains a command, this setting is not available, and the hard clip area of the PS command becomes the base output size. Select this option when outputting at non-standard sizes. After selecting this setting, set Paper Width and Paper Height. You can set in 0.1 mm increments. Paper Width T7270/T7270D: 89*1 to 1,118 mm T5270/T5270D: 89*1 to 914 mm T3270: 89*1 to 610 mm Paper Height 127 to 4,620 mm 3mm* 5mm The actual output size depends on the Margin Options setting. *1. The smallest size supported by the printer is 254 mm wide × 127 mm long. If a smaller size is entered for this setting, the document will print with wider-than-expected margins, which must be trimmed. Select the top, bottom, left, and right margin values. For a cut sheet, the bottom margin is 14 mm regardless of the settings. 143