Epson T7270 User Manual - Page 197
Notes When Moving or Transporting the Printer, Notes When Moving the Printer
View all Epson T7270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Epson SureColor T-Series User's Guide Appendix Notes When Moving or Transporting the Printer 4 When the optional Multifunction stand is attached, pull up and fix the fall prevention fixture of the stand. This section describes precaution when moving and transporting the product. Notes When Moving the Printer This section assumes that the product is being moved to another location on the same floor without traversing stairs, ramps, or lifts. See the following section for information on moving the printer between floors or to another building. U"Notes on Transporting" on page 198 ! Caution: Do not tilt the product more than 10 degrees forward or back while moving it. Failure to observe this precaution could result in the printer falling over, causing accidents. c Important: Do not remove the ink cartridges. Failure to observe this precaution could cause the print head nozzles to dry out. Getting Ready 1 Confirm that the printer is off. 2 Disconnect the power cords and all other cables. 3 Close the paper basket. When the optional auto take-up reel unit is installed, remove any paper from it. c Important: If the printer is moved with the fall prevention fixture lowered, the floor may be scratched. 5 Unlock the stand. Release the locks of the casters on the left and right legs. 197