Epson T7270 User Manual - Page 44
Replacing Paper
View all Epson T7270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Epson SureColor T-Series User's Guide Basic Operations displays the results, preventing waste caused the paper running out part way through a print job. This allows you to choose whether to print on the existing roll or replace the paper, preventing waste. The T7270/T5270/T3270 can predict availability only when the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been installed. U"Saving to and Reprinting on the Optional Hard Disk Unit" on page 67 If paper has run out, the T7270D/T5270D can switch to Roll 1 or Roll 2 automatically based on predicted availability and continue printing. U"Switching to Roll 1/Roll 2 by Roll Length" on page 90 Replacing Paper This section describes how to replace paper. The process for removing the current paper differs with the type of paper loaded; follow the instructions displayed in the control panel. Buttons that are used in the following settings 1 Confirm that the printer is ready and press the ( button. The Load/Remove Paper menu will be displayed. 2 Press the d/u buttons to select the type of paper used to replace the current paper, and then press the Z button. 3 The printer will eject the current paper. The process for ejecting the paper varies with the type of paper loaded, as described below. If On is selected for Roll Paper Remaining Barcode printing will begin; when printing is complete, the roll will rewind automatically. If Off is selected for Roll Paper Remaining The roll rewinds automatically. Note: When the display shows Turn roll paper adapter to wind up roll paper, open the roll paper cover and rewind the paper by hand. 44