Epson T88IVP Application Guide - Page 11

Version 2.65 Jul. 2009 2.4 Device Settings The following explanation is about the settings for TM-T88IV. 2.4.1 Usable Device Specific Settings For the TM-T88IV, the following device specific settings are settable by the SetupPOS utility. For the detail, please refer to the corresponding part of the Section 2 of "EPSON OPOS ADK MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)" Tab Settings General Disable panel buttons Assume print complete when data output finishes Ignore firmware version check Homogenize Error Codes *1 Output complete timeout [s] Paper Paper Type Paper Width [mm]: LineWidth [dot]: LineCharsList Bitmap TMFlogo... Color Bitmap Method Brightness Primary Status Log ERROR OFFLINE Log file name (full path name) Default Value *2 Maximum file size [KB] Multilingual font Printing Properties Receipt Characters per Line Receipt Line Spacing [dots] *1 The operations differ by the firmware versions. See the corresponding part of the section 2 of this manual. *2 Available only for the Multilingual character model. 2.4.2 Paper Type Setting The TM-T88IV models support the following paper type. After adding the TM-T88IV by the SetupPOS utility, open the "Device Specific Settings" dialog box. In the "Paper" tab the paper type could be selected.. The settable paper types are as follows: • Normal • 2-Color Thermal The default paper type is set to Normal. 8 APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T88IV)