Epson T88IVP Application Guide - Page 6

Version 2.65 Jul. 2009 Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the environment of use. Make other settings in accordance with the settings described above. When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON. 2) Parallel Port DIP-SW 1 No. Setting 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF DIP-SW 2 No. Setting Recommended 1 OFF Recommended 2 OFF Fixed at OFF 3 OFF Fixed at OFF 4 OFF Fixed at OFF 5 OFF Fixed at OFF 6 OFF Fixed at OFF 7 OFF Fixed at OFF 8 ON Settable Fixed at OFF Settable Settable Fixed at OFF Fixed at OFF Fixed at OFF Fixed at ON It is possible to change the settings of DIP-SW1-1 (Auto line feed) and DIP-SW1-2 (Specification of the received buffer capacity), but it is recommended to leave them OFF. Set DIP-SW2-3 and DIP-SW2-4 (Specification of the print density) to match the environment of use. Make other settings in accordance with the settings described above. When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON. When parallel I/F is used with Windows 2000, Windows XP or Windows Vista, please set DIP-SW2-1 (BUSY condition) to ON (Receive buffer full). 3 APPLICATION DEVELOPMENT GUIDE POSPrinter (TM-T88IV)