Epson TM-P80 Plus Product Information Guide PIG - Page 3

Reliability, Electrical, Safety, Environmental, Dimensions, Mobilink P80, Control Panel, LEDs

Page 3 highlights

Reliability Printer mechanism: 10 million lines Thermal head: 100 million pulses, 50 km MTBF: 120,000 hours MCBF: 16 million lines Autocutter: 500,000 cuts Electrical Battery: Input voltage: Charging time: Lithium-ion (part OT-BY60II) DC 24 V/Max. 1.5 A or DC 12 V/Max. 1 A 2.5 hours Safety Electromagnetic interference: USA: FCC/ICES-003 Class A Canada: CAN ICES-3 (A)/NMB-3 (A) Safety standards: Directive 1999/5/EC Environmental Operating temperature range: Temperature: 32 to 113°F (0 to 45°C) (except for print quality) Humidity: 10 to 90% RH (except for paper) Storage temperature range: Temperature: -13 to 158°F (-25 to 70°C) (except for print quality) Humidity: 10 to 90% RH (except for paper) Operating noise: 53 dB Dimensions Mobilink P80 Dimensions (H × W × D): 2.5 × 4.3 × 5.5 inches (64 × 110 × 140 mm) Weight: approx. 1.1 lb (500 g) (including battery and belt clip, excluding roll paper) Mobilink P80 Plus Dimensions (H × W × D): Weight: 2.7 × 4.3 × 5.5 inches (64 × 110 × 140 mm) approx. 1.4 lb (640 g) (including battery, excluding belt clip and roll paper) Control Panel LEDs (Power) On when power is on. Flashing when printer is powering off; when the Feed button is pressed or standing by in software set up mode; and when a wireless LAN printer is activated. Error On when the printer is offline (paper out, power-on initialization, paper cover open, battery charge at "S" level). Flashing if there is an error. Possible causes include: ❏ thermal head temperature too high ❏ roll paper cover opened during printing ❏ memory R/W check abnormality ❏ Extremely high or low power supply voltage ❏ CPU executed an incorrect address ❏ wireless communication error ❏ internal circuit connection abnormality Turn the printer off for a few seconds, then turn the printer back on. If the LED is still blinking, contact a dealer or qualified service person. Charge On when the battery is being charged. Off when the battery is fully charged. Flashing when the battery is charging abnormally. Mobilink P80 & Mobilink P80 Plus - 3

  • 1
  • 2
  • 3
  • 4
  • 5

Mobilink P80 & Mobilink P80 Plus
- 3
Reliability
Printer mechanism: 10 million lines
Thermal head:
100 million pulses, 50 km
MTBF:
120,000 hours
MCBF:
16 million lines
Autocutter:
500,000 cuts
Electrical
Battery:
Lithium-ion (part OT-BY60II)
Input voltage:
DC 24 V/Max. 1.5 A or
DC 12 V/Max. 1 A
Charging time:
2.5 hours
Safety
Electromagnetic interference:
USA:
FCC/ICES-003 Class A
Canada:
CAN ICES-3 (A)/NMB-3 (A)
Safety standards:
Directive 1999/5/EC
Environmental
Operating temperature range:
Temperature:
32 to 113°F (0 to 45°C)
(except for print quality)
Humidity:
10 to 90% RH (except for paper)
Storage temperature range:
Temperature:
-13 to 158°F (-25 to 70°C)
(except for print quality)
Humidity:
10 to 90% RH (except for paper)
Operating noise:
53 dB
Dimensions
Mobilink P80
Dimensions
(H × W × D):
2.5 × 4.3 × 5.5 inches
(64 × 110 × 140 mm)
Weight:
approx. 1.1 lb (500 g)
(including battery and belt clip, excluding
roll paper)
Mobilink P80 Plus
Dimensions
(H × W × D):
2.7 × 4.3 × 5.5 inches
(64 × 110 × 140 mm)
Weight:
approx. 1.4 lb (640 g)
(including battery, excluding belt clip and
roll paper)
Control Panel
LEDs
(Power)
On
when power is on.
Flashing
when printer is powering off; when the Feed button
is pressed or standing by in software set up mode; and when a
wireless LAN printer is activated.
Error
On
when the printer is offline (paper out, power-on
initialization, paper cover open, battery charge at “S” level).
Flashing
if there is an error. Possible causes include:
thermal head temperature too high
roll paper cover opened during printing
memory R/W check abnormality
Extremely high or low power supply voltage
CPU executed an incorrect address
wireless communication error
internal circuit connection abnormality
Turn the printer off for a few seconds, then turn the printer
back on. If the LED is still blinking, contact a dealer or
qualified service person.
Charge
On
when the battery is being charged.
Off
when the battery is fully charged.
Flashing
when the battery is charging abnormally.