Epson TM-P80 Plus Product Information Guide PIG - Page 5

Performing a Self-Test, Removing a Paper Jam, Cleaning the Thermal Head

Get Epson TM-P80 Plus PDF manuals and user guides View all Epson TM-P80 Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

3. If the printer is attached to a belt using the belt clip, insert the roll paper as shown below. Cleaning the Thermal Head Caution: Do not touch the thermal head, because it can be very hot after printing. Let it cool before you begin cleaning. 1. Turn off the printer. 2. Open the roll paper cover by pressing down on the roll paper cover open button. 4. Pull out some paper, and close the roll paper cover. 5. Tear off the extra paper using the manual cutter. Performing a Self-Test Follow the steps below to perform a self-test on roll paper: 1. Make sure the printer is off and the roll paper cover is shut. 2. Press and hold the Feed button and turn on the printer. The printer prints its status and the Paper LED begins flashing. 3. To continue the self-test, press the Feed button for less than one second. The self test is complete when *** completed *** is printed. Removing a Paper Jam Caution: Do not touch the thermal head, because it can be very hot after printing. Let it cool before you remove the jammed paper. Note: (Mobilink P80 Plus only) If the roll paper cover will not open, the autocutter blade may be locked. If you can see the autocutter blade through the paper feed slot, the blade is locked. See your TM-P80 User Manual for instructions on unlocking the autocutter blade. 1. Turn off the printer. 2. Open the roll paper cover by pressing down on the roll paper cover open button. 3. Remove the jammed paper. 4. Close the roll paper cover. 3. Clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol solvent (ethanol or IPA). 4. Close the roll paper cover. Additional Information The Epson support site has more information about the Mobilink P80 and Mobilink P80 Plus: http://www.epson.com/cgi-bin/Store/jsp/pos/index.do?productpk=691 EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Mobilink is a trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2015 Epson America, Inc., 7/15 CPD-40234R1 Mobilink P80 & Mobilink P80 Plus - 5

  • 1
  • 2
  • 3
  • 4
  • 5
Mobilink P80 & Mobilink P80 Plus
- 5
3.
If the printer is attached to a belt using the belt clip, insert
the roll paper as shown below.
4.
Pull out some paper, and close the roll paper cover.
5.
Tear off the extra paper using the manual cutter.
Performing a Self-Test
Follow the steps below to perform a self-test on roll paper:
1.
Make sure the printer is off and the roll paper cover is shut.
2.
Press and hold the
Feed
button and turn on the printer. The
printer prints its status and the
Paper
LED begins flashing.
3.
To continue the self-test, press the
Feed
button for less than
one second.
The self test is complete when
*** completed ***
is printed.
Removing a Paper Jam
Caution:
Do not touch the thermal head, because it can be very hot
after printing. Let it cool before you remove the jammed paper.
Note:
(Mobilink P80 Plus only) If the roll paper cover will not open, the
autocutter blade may be locked. If you can see the autocutter blade
through the paper feed slot, the blade is locked. See your
TM-P80
User Manual
for instructions on unlocking the autocutter blade.
1.
Turn off the printer.
2.
Open the roll paper cover by pressing down on the roll
paper cover open button.
3.
Remove the jammed paper.
4.
Close the roll paper cover.
Cleaning the Thermal Head
Caution:
Do not touch the thermal head, because it can be very hot
after printing. Let it cool before you begin cleaning.
1.
Turn off the printer.
2.
Open the roll paper cover by pressing down on the roll
paper cover open button.
3.
Clean the thermal elements of the thermal head with a
cotton swab moistened with an alcohol solvent (ethanol or
IPA).
4.
Close the roll paper cover.
Additional Information
The Epson support site has more information about the
Mobilink P80 and Mobilink P80 Plus:
EPSON is a registered trademark and EPSON Exceed Your Vision is a
registered logomark of Seiko Epson Corporation.
Mobilink is a trademark of Epson America, Inc.
General Notice: Other product names used herein are for identification
purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2015 Epson America, Inc., 7/15
CPD-40234R1