Epson TM-T70-i ePOS-Device XML Users Manual For TM-i firmware v4.1 - Page 88

❏ status  Depending on the printer situation, an OR function is acquired in a decimal expression from the following values. Attribute value "0x00000001" "0x00000002" "0x00000004" "0x00000008" "0x00000020" "0x00000040" "0x00000100" "0x00000200" "0x00000400" "0x00000800" "0x00002000" "0x00004000" "0x00020000" "0x00080000" "0x01000000" "0x80000000" * Description No response from the TM printer Printing is successfully completed  Status of the 3rd pin of the drawer kick-out connector = "H"  Battery offline status Offline The cover is open Paper is being fed by a paper feed switch operation Waiting to be brought back online The paper feed switch is being pressed (ON) A mechanical error occurred An autocutter error occurred An unrecoverable error occurred An automatically recoverable error occurred No paper in roll paper near end sensor No paper in roll paper end sensor A buzzer is on (only for applicable devices) The spooler has stopped * ePOS-Device Service Ver. 2.6 or later versions supported ❏ battery  Depending on the battery situation, an OR function is acquired in a decimal expression from the following values. Status of power Attribute value 0x30XX 0x31XX Description The AC adapter is connected The AC adapter is not connected Remaining battery Attribute value 0xXX36 0xXX35 0xXX34 0xXX33 0xXX32 0xXX31 0xXX30 Description Battery amount 6 Battery amount 5 Battery amount 4 Battery amount 3 Battery amount 2 Battery amount 1 (Near end) Battery amount 0 (Real end) 0 is indicated when the model doesn't have a battery installed. 88