Epson TM-T70-i ePOS-Device XML Users Manual For TM-i firmware v4.1 - Page 98
<image
![]() |
View all Epson TM-T70-i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Print a raster graphic bit-image. (Data type xs:base64Binary) Raster graphics refer to data generated by horizontally scanning the pixels of an image from the top left corner of that image as the origin point. Data is generated based on 1 bit per pixel for two-tone images, and 4 bits per pixel for 16-tone images, starting with the upper bits of byte data. And zero-padding is performed so that scan data per line can be treated on a byte basis. • To print a raster image at high speed, specify "left" for the align attribute and specify a multiple of 8 that does not exceed the printer paper width for the width attribute value. • Page mode does not support printing in multiple tones. Multiple tone graphics can only be printed in standard mode. • In page mode, a raster image is laid out in the current print position with the reference point being its bottom left dot. The print position will not move. • In page mode, set the print position so that a raster image does not extend beyond the print area. • When multiple tones are set for raster images, intermitting printing may occur because the amount of data to print increases and white stripes may appear in the print result. • The scan quality of barcodes/2D-codes printed as multiple-tone raster images cannot be guaranteed. Print them as two-tone images. • To create raster graphic bit-images, use the ePOS-Print XML generator tool or your own application. Note the following when creating raster graphic images using your own application. Two-tone image: Specify a multiple of 8 for the image width or fill the missing bits with zeros. 16-tone image: Specify a multiple of 2 for the image width or fill the missing bits with zeros. Attribute width : (Required attribute) Specifies the image width in dots. height : color : (Required attribute) Specifies the image height in dots. (Optional attribute) Specifies the character color. Attribute value "none" "color_1" (default) "color_2" "color_3" "color_4" Description Characters are not printed. First color Second color Third color Fourth color 98
![](/manual_guide/products/epson-tmh6000ivdt-eposdevice-xml-user-s-manual-tmi-firmware-v41-e74dbd1/98.png)