Epson TM-U220 TM-U220 Technical Reference Guide - Page 78
Install EPSON Advanced Printer Driver
View all Epson TM-U220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
1. Install EPSON Advanced Printer Driver Execute the installer "ADT###e.exe," and select modules which you need. The recommended modules are shown below. Refer to the installation manual for details. EPSON TM-U220 Receipt (76mm): EPSON TM-U220 Receipt (69.5mm): EPSON TM-U220 Receipt: (57.5mm) Status API: USB driver: This module (printer driver) is required for printing on 76mm width receipt. This module (printer driver) is required for printing on 69.5mm width receipt. This module (printer driver) is required for printing on 57.5mm width receipt. This module is required for monitoring the printer. This module provides API to monitor the printer's status. This module (device driver) is required for the USB interface model printer. Note: For the Manual, Sample program, and each utility, you have to download separately the ADT###e.exe. 2. Install "USB driver" When you use a USB interface model printer, you need to install the "USB driver." The procedure depends on the OS; therefore see the installation manual. If you aren't using a USB interface model printer, you don't need to install this module. 3. Install "EPSON Net Direct print" When you use the Ethernet interface model printer with Windows98/95, you need to install "EPSON Net Direct print." See the installation manual for details. If you aren't using the Ethernet interface model printer, or aren't using Windows 98/95, you don't need to install this module. 4. Set up the printer port After installing APD (and "USB driver" or "EPSON Net Direct print") you need to adjust the printer port setting for the printer interface model. See the Installation manual and the User's manual for details. Note: When you use the serial interface model printer, you need to adjust serial communication setting between printer and printer driver. See "Adjusting the DIP Switches" (page 3-15) and "Memory Switches" (page 3-17) for information on the settings. 5. Test print Execute test print from the "property" of printer to confirm the setting. If the test print is not correct, please see the "Notes" on the "User's Manual" and "Status API Reference Manual" to solve the your problem. 3-36 Setup Rev. H