Epson TM-U950P Specifications - Page 18

1. GENERAL SPECIFICATIONS 1.1 Printing Specifications 1) Printing method: 2) Head wire configuration: 3) Head wire diameter: 4) Printing directions: 5) Printing speed: 6) Characters per line: 7) Characters per inch: 8) Print mode: Serial impact dot matrix 9-pin vertical line, wire pitch 1/72 inch 0.29 mm (.01") Bidirectional, minimum distance printing Refer to Table 1.2.1 Refer to Table 1.2.1 Refer to Table 1.2.1 Table 1.1.1 Print Mode Print mode Printing speed Print head energizing time Receipt/journal Default status Switching *2 Slip Default status Switching *2 Normal mode High Normal Depends on Possible -- Possible Low speed Low mode Normal DIP SW 2-4 Possible -- setting Possible Copy mode Low Copy (long) -- Possible Selected Possible NOTES: 1. The printer automatically goes to low speed mode during bit image printing, regardless of the type of selected paper. 2. Print mode can be changed using the GS E command. 1.2 Character Specifications 1) Number of characters: 2) Character structure: 3) Character size: Alphanumeric characters: International characters: Extended graphics: 95 32 128 ´ 8 pages (including space pages) 9 ´ 9 3-dot spacing (in half dot units) 7 ´ 9 2-dot spacing (in half dot units) Larger spacing can be set by using ESC SP. Refer to Table 1.2.1 Table 1.2.1 Characters Per Inch, Characters Per Second, Characters Per Line, Character Size Character Structure (Horizontal dots ´ vertical dots) 9 ´ 9 7 ´ 9 Character Spacing (half dots) 3 dots 2 dots Characters Per Inch (CPI) 12.5 16.7 Characters Per Second (CPS) (Carriage moving speed) High speed Low speed 233 200 311 267 Characters Per Line (CPL) Roll Paper Slip Paper 30 66 40 88 Character Size (units: mm) Width ´ Height 1.6´3.1 (.06"´.12") 1.3´3.1 (.05"´.12") TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET NO. REVISION A NEXT 2 SHEET 1