Epson TM-U950P Specifications - Page 89

L H * ESC m n n d1...dk [Name] [Format] Select bit image mode L H HHd1...dk [Range] [Description] m = 0, 1 0 £ nL £ 255 0 £ nH £ 3 0 £ d £ 255 k = nL + nH ´ 256 L H Selects a bit image mode using m and the number of dots using n and n . H Divide the number of dots to be printed by 256. The integer answer is n and the L remainder is n . Therefore, the number of dots in the horizontal direction is calculated by nL + nH. ´ 256 If the bit image data input exceeds the number of dots to be printed on a line, the excess data is ignored. When the first data is transmitted exceeding one line, the printer prints the data from the beginning of the next line. The d indicates the bit image data. Set a corresponding bit to 1 to print a dot or 0 to not print a dot. The bit image modes selectable by m are as follows: Number of m Vertical Dots Horizontal Direction Dot Density Horizontally adjacent dot Number of Horizontal Dots Paper Roll Slip 0 8 Single density Permitted 180 400 1 8 Double density Prohibited 360 800 [Notes] L L If the value of m is out of the specified range, the data following n (n is included) is processed as normal data. After printing a bit image, the printer returns to normal data processing mode. The relationship between the image data and the dots to be printed is as follows: TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT AF 6610 SHEET 5690