Epson TM-U950P Specifications - Page 58

3.3 Switches and Buttons 3.3.1 Power switch (locking type) The power switch located on the front (lower left) of the printer turns the power on or off. Turn on the power only after connecting the power supply. 3.3.2 Panel buttons Panel buttons are enabled or disabled by the ESC c 5 command. are disabled. These buttons are inactive if they 1) Receipt feed button: Non-locking push button [Function] If this button is pushed once and released, the printer feeds receipt paper for one line based on the line spacing set by ESC 2 and ESC 3. If this button is held down, the printer feeds paper continuously. The paper is fed after the carriage is moves to the center of the receipt paper roll. [Note] The switch is enabled when the printer cover is open, regardless of the ESC c 5 setting. 2) Journal/slip feed button: Non-locking push button [Function] If this button is pushed once and released, the printer feeds journal paper for one line based on the line spacing set by ESC 2 and ESC 3. If this button is held down, the printer feeds paper continuously. When this button is pushed in slip mode (the slip LED lights or blinks), the printer feeds slip paper. In 2-sheet mode, the paper is fed after the carriage is moved to the center of the journal paper roll. In slip mode, the paper is fed after the carriage is moved to the right edge of the slip paper. [Note] The switch is enabled when the printer cover is open, regardless of the ESC c 5 setting. TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 34 SHEET 33