Epson TM-m30III ePOS-Device XML Users Manual - Page 119
XML Reference - PrinterControl XML
View all Epson TM-m30III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 4 XML Reference - PrinterControl XML Attribute value Description "JobSpooling" Spooling "TooManyRequests" The number of print jobs sent to the printer has exceeded the allowable limit. "RequestEntityTooLarge" The data size of the print job is larger than the allowable limit of the printer. "ERROR_WAIT_EJECT" Waiting for paper removal. status Acquires the logical OR of the values listed below in decimal value depending on the printer status. Attribute value Description "0x00000001" TM printer does not respond. "0x00000002" "0x00000004" Printing completed. • Drawer kick connector pin No.3 status = "H" • Offline status due to the battery level "0x00000008" Offline status "0x00000020" Cover is open. "0x00000040" Paper is being fed by the paper feed switch. "0x00000200" Paper feed switch is held depressed. "0x00000400" Mechanical error occurred. "0x00000800" Auto cutter error occurred. "0x00002000" Unrecoverable error occurred. "0x00004000" Automatically recoverable error occurred. "0x00010000" Waiting for insertion of a slip sheet for slip printing "0x00020000" Roll paper has almost run out. "0x00040000" Waiting for ejection of a slip sheet for slip printing "0x00080000" Roll paper has run out. "0x00200000" Paper is not inserted deep enough. "0x00400000" "0x01000000" Paper is not correctly aligned with the right edge of the paper guide. • Buzzer is sounding • Slip printing is not selected. • Waiting for labels to be peeled off. (supported model only) • Waiting for paper removal. (supported model only) "0x02000000" Cannot print on the paper. 119