Epson TM-m30III ePOS-Device XML Users Manual - Page 33
Other TM-i Series
View all Epson TM-m30III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Building Environment - Registration of Device Other TM-i Series Configure the following settings for each device connected to the TM-i printer. Configure the settings using EPSON TMNet WebConfig. Printer Setting Device ID Model IP Address Retry interval(ms) Customer Display Setting Value Enter the ID (any character string) of the printer to be controlled. Select the model of the printer to be controlled. Specify the IP address of the printer for each device ID. Specify the retry interval after timeout. Setting Customer Display Communications settings Brightness settings Setting Value Set whether or not this is used. Set the communication speed, data bit and parity. Set the brightness of the customer display. The device ID of the customer display is fixed to "local_display". Key input device Setting Device ID Device name Control Script Serial communications Setting Serial communications Communication speed(bps) Data bit Parity Stop bit Flow control Setting Value Enter the device ID (any character string). Select the device name of the key input device. Select the device control script to be used for the key input device. Setting Value Set whether or not this is used. Set the communication speed of the device. Set the data bit. Set the parity. Set the stop bit. Set the flow control. The device ID of the serial communication device is fixed to "local_serial". 33