Epson U295P User Manual - Page 6

English Installing a Ribbon Use the EPSON ERC-27 ribbon cassette. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty. 1. Turn the printer on using the power switch on the left side. 2. Press the RELEASE button (the RELEASE LED lights). This puts the printer in the paper release mode. 3. Turn the printer off. CAUTION: Perform the steps above to make sure the printer is in the paper release mode before you install or remove a ribbon cassette. 4. Open the printer cover by 2 first pressing the ridges on the top to the left slightly and then pulling the cover forward, as shown in illustration 2. 5. If there is a used ribbon, 3 remove it by grasping the handle and pull it straight out, as shown by the arrow in illustration 3. 6. Before installing the new ribbon, check that it is not creased or twisted. Then turn the feed knob in the direction of the arrow on the ribbon cassette to take up any slack in the ribbon. 7. Carefully insert the ribbon cassette in the printer as 4 shown in illustration 4. Notice exactly where the ribbon must go. 8. Push firmly on the right side and then the left side of the ribbon cartridge until each side clicks into place. 4 TM-U295/TM-U295P User's Manual