Epson VS330 Operation Guide - EasyMP Monitor v4.53 - Page 26

Monitoring window layout 26 Lamp failure at power on (Lamp 1) High internal temperature error Air filter air flow sensor error Fan error Supply System Error (Ballast) Supply System Error (Ballast 2) Cinema filter error Cooling system error (Peltier element) Other error Exhaust vent shutter error Obstacle Detection Error Lamp failure at power on (Lamp 2) Low air flow error Internal Error Sensor error Supply System Error (Ballast 1) Auto Iris Error Shutter error Cooling system error (pump) Obstacle Detection Warning Easy Interactive Function Error *1 When Temperature level display group view is set to On at Environment setup in the Tool menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is Off. *2 Check the following items. - Check that the projector's power is turned on. - Check that the LAN cable is connected. - Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. *4 You can display Replace Lamp at any time by setting a preset in the Environment setup in the Tool menu. q • The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed. EasyMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click "Refresh" in the main window to update the status. • Detectable error information differs with the projector you are using. Selecting display items You can select only the required items to be displayed in Detail list view. Procedure A Select "Option" from the View menu. The Option window will be displayed. B Select the check box of the item you want to display.