Epson VS330 Operation Guide - EasyMP Monitor v4.53 - Page 7

Installing EasyMP Monitor 7 Installing EasyMP Monitor Operating environment This software is compatible with computers that comply with the following requirements. OS CPU Memory capacity Free hard disk space Display Windows 2000 Professional SP4 Windows XP Home Edition SP2/SP3* Windows XP Professional SP2/SP3* Windows Vista* (All editions except Starter Edition) Windows Vista SP1/SP2* (All editions except Starter Edition) Windows 7 32 bit version (All editions except Starter Edition) Windows 7 64 bit version Windows 8 32 bit version and 64 bit version • Internet Explorer Ver. 5.0 or later must be installed. Pentium MMX 166 MHz or higher (Pentium II 233 MHz or higher recommended) 64 MB or more (128 MB or more recommended) 50 MB or more SVGA (800 x 600) or higher resolution, 32 bit or higher display color * Supports only 32 bit version of OS. • Macintosh computers cannot be used. • Operations carried out at the computer may become slow depending on the number of projectors being managed. If this happens, use a computer with higher specifications. • EasyMP Monitor cannot be used in environments which do not allow pings to be transmitted. Transferring the settings If you are already using EasyMP or EMP Monitor, you can transfer the projector settings to this version. The settings are stored as a data file (EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you install this software. EMP Monitor.dat can be found at the following location if the default settings were used to install the software: • If your operating system is Windows 2000 or Windows XP "C:\Program Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx represents the software version)" • If your operating system is Windows Vista or Windows 7 "C:\Users\(User Name)\AppData\Local\VirtualStore\Program Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx represents the software version)" If you cannot find the "AppData" folder, click "Start" - "Control Panel" - "Appearance and Personalization" - "Folder Options". Select "View" tab, and then configure the "Show hidden files, folders, and drives" setting in "Advanced settings".