Epson WorkForce Pro WF-6090 User Manual - Page 60

• If DHCP is out of date, or the IPv6 address is out of date or was not obtained, you may not be able to find the IP address registered in Web Config. • If that does not solve the problem, enter a static IP address using Web Config. Parent topic: Solving Network Security Problems Cannot Create the Secure IPP Printing Port If you cannot create the secure IPP printing port, try these solutions: • Make sure you specified the correct server certificate for SSL/TLS communication using Web Config. • If you are using a CA certificate, make sure it is imported to the computer that is accessing the product. Parent topic: Solving Network Security Problems Cannot Connect After Configuring IPsec/IP Filtering The set value may be incorrect. Disable IPsec/IP filtering from the product's control panel. Connect from the computer and configure the IPsec/IP Filtering settings again. Parent topic: Solving Network Security Problems Cannot Access the Product After Configuring IEEE 802.1X If you cannot access the product after configuring it for IEEE 802.1X, disable IEEE 802.1X and Wi-Fi using the product control panel. Then connect the product and a computer, and configure IEEE 802.1X using Web Config again. Parent topic: Solving Network Security Problems Solving Digital Certificate Problems Check these sections if you have problems using a digital certificate. Digital Certificate Warning Messages Cannot Import a Digital Certificate Cannot Update a Certificate or Create a CSR Deleted a CA-signed Certificate Parent topic: Solving Problems Digital Certificate Warning Messages If you see a warning message when using a digital certificate, check for solutions in this table. 60