Epson WorkForce WF-7010 Start Here - Page 1

WorkForce® WF-7010 Start Here Read these instructions before using your printer. 1 Unpack 3 Install ink cartridges 1 Open the printer cover and cartridge cover. 2 Shake each cartridge as shown for about 5 seconds and remove from package. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all tape and protective materials, including the foam and plastic inside the printer. 3 Install each cartridge in the correct slot for its color. Push each cartridge in until it clicks. 2 Turn on 1 Connect the power cord. Caution: Do not connect to your computer yet. 2 Press the power button. 4 Close the printer cover and the cartridge cover. The printer starts priming the ink. This takes about 5 minutes. When the green power light stops flashing, priming is complete. Caution: Don't turn off the printer or open the cover while it is priming or you'll waste ink. Note: Your printer ships with full cartridges and part of the ink from the first cartridges is used for primming the printer. *412102600* *412102600*