Epson XP-970 Start Here - Installation Guide - Page 2

2 Unpack the ink cartridges. Caution: Do not touch the areas shown above. Doing so may prevent normal operation and printing. 3 Remove the cap from each ink cartridge. Store the caps in the included plastic bag. Note: Save the caps and use them to recap the ink cartridges after removing them for storage or disposal. 4 Insert the cartridges at an angle in the holder for each color. Press each cartridge down until it clicks. 4 Load paper See the instructions below for loading paper in cassettes 1 and 2. Note: See the online User's Guide for a complete list of compatible paper types, sizes, and capacities, and instructions on loading paper in the rear paper feed slot and printing on a CD/DVD/Blu-ray Disc™. Output tray Cassette 1 Cassette 2/front cover Epson paper sizes 4" × 6", 5" × 7" 8" × 10", Letter, A4, Legal Cassette 1 • 1 Lower the front cover. Cassette 2 • • 5 Lower the scanner unit. 6 Select Installed to start charging the ink. Ink charging takes approximately 7 minutes. When you see a completion message on the printer's LCD screen, charging is complete. Caution: Don't turn off the printer or raise the scanner unit while the printer is charging or you'll waste ink. Note: As part of setup, your product's serial number will be sent to a secure Epson server so that you can be eligible to participate in programs we may offer from time to time, including the Epson ink replenishment program. You will have a separate opportunity to consent to participating in such programs. 7 Follow the on-screen instructions to adjust the print quality of your product. Note: • You need to load paper before you can adjust the print quality. See the "Load paper" section for details. • Select Adjust Later if you want to adjust the print quality later. For more information, see the online User's Guide. 2 Pull out a paper cassette. Cassette 1 Cassette 2 3 Slide the side edge guides outward and set the front edge guide to the paper size you are using. Cassette 1 Cassette 2 4 Insert the paper with the glossy or printable side facedown. Cassette 1 Cassette 2 Note: Make sure the paper is loaded against the front edge guide and not sticking out past the triangle symbol at the end of the cassette.