Eufy RoboVac 11c RoboVac 11c_Manual_EN - Page 11

Clean the Rolling Brush Pull on release tabs to unlock brush guard as shown. Lift the rolling brush to remove. Clean the rolling brush with the provided cleaning tool or a vacuum cleaner. Reinstall the rolling brush by inserting the fixed protruding end first, then clicking into place. Press down to snap the brush guard into place. 1 2 3 4 5 Clean the Sensors and Charging Pins To maintain best performance, clean the drop sensors and charging pins regularly. • Dust off the drop sensors and charging contact pins using a cloth or cleaning brush. Clean the Side Brushes Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt may adhere to them. Be sure to clean them regularly. • Carefully unwind and pull off any hair or string that is wrapped between the main unit and the side brushes. • Use a cloth dampened with warm water to remove dust from the brushes or to gently reshape them. T Use the side brushes only when they are completely dry. Replace the Side Brushes The side brushes may become bent or damaged after using for a period of time. Follow the steps below to replace them. • Pull off the old side brushes and snap the new ones into place. 18 19