Eufy RoboVac 11c RoboVac 11c_Manual_EN - Page 7

Method 2: Press on the remote control to return RoboVac to the Charging Base. Method 3: Charge RoboVac directly with the power adaptor. RoboVac Status Light Flashing red Flashing blue Solid blue Flashing / Solid red + Beeping Low power Charging Fully charged / Cleaning / Returning to Charging Base RoboVac has an error - Turn o the power switch if RoboVac will not be used for a long T period of time. To preserve the battery's lifespan, recharge at least once every 3 months. - When charging RoboVac, press and hold on RoboVac for 20 seconds to enter Reduced Power Standby Mode for power-saving. Wi-Fi is disabled in this mode. Press any key to return to Normal Mode. - All settings will be erased when RoboVac is turned o or when the battery power is exhausted. You will need to reschedule the cleaning time on the EufyHome app. 10 Start/Stop Cleaning 1. Turn on the main power supply Press the power switch on the side of RoboVac to turn on the main power supply. ON 2. Start cleaning Press on RoboVac or on the remote control to start cleaning in Auto mode. When the system is idle for 10 minutes, RoboVac switches to Standby T Mode automatically to save power. 3. Stop cleaning Press on RoboVac or on the remote control to stop cleaning. Select a Cleaning Mode 1. Auto cleaning RoboVac calculates the room size and optimizes its path by selecting different cleaning modes automatically until cleaning is complete. Press on RoboVac or on the remote control to start cleaning in Auto Mode. 11