Fender BXR Dual Bass 400 Owner Manual - Page 2
Fender BXR Dual Bass 400 Manual
View all Fender BXR Dual Bass 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
DUAL BASS 400 OWNER'S MANUAL The DUAL BASS 400 AMPLIFIER is the most recent effort in state-of-the-art bass amplifier technology, and is a member of the FENDER BXR series. The design execution of the DUAL BASS 400 was carried out with the aid of some of today's best players, and represents years of thought and consideration in the determination of features and specifications. The features included in the DUAL BASS 400 will provide a forum for almost every conceivable playing style from "contemporary" to those yet to come. Much attention has been given to those who would like to take advantage of the new signal processing devices which have appeared in recent time. A special MULTI-LEVEL effects loop allows the use of external processors from simple battery powered devices to professional rack mounted studio types. Two additional patch points have been provided such that separate HI-RANGE and LO-RANGE processing may be accomplished. Alternately, these points allow the use of FULL STEREO signal processing. The preamp section of the DUAL BASS 400 features two inputs, of differing sensitivity. A pair of buttons called "ENHANCE" are provided to allow enhancement of the low or high end of the spectrum. An ELEVEN band graphic equalizer starting at 40 Hz, and extending to 10 kHz allows easy tailoring of your instrument's personality. Two line out connections are included, one transformer balanced, and one unbalanced. The transformer balanced line out is very useful in large P.A. applications or in the studio. A front panel button allows the line feed to be taken before the preamp (pre) or after the preamp and multi-level effects loop (post). For high level players who need the BI-AMP mode, a continuously variable electronic crossover is available at the push of a button. The crossover "FREQUENCY" is adjustable from 200 Hz, to 2.2 kHz. With the BI-AMP MODE employed, the two power amplifiers are now separated to provide 200 Watts for the high end and an additional 200 Watts for the low end. In the STEREO MODE, the same full range signal is sent to both power amplifiers, with stereo signal generation available through the use of external signal processing. The dual 200 Watt power amplifiers were designed to give reliable service under all conditions and are equipped with our exclusive DELTACOMP adaptive compression system. When DELTACOMP engages, it is practically impossible to cause the power amplifiers to clip (distort). With DELTACOMP, apparent compressor release time is kept short yet waveform distortion is kept to a minimum at low frequencies. The DUAL BASS 400 is designed to perform well with almost any high quality speaker system, but performs best when used with members of the FENDER BXR series. Speakers in this series are the BXR-115, with a single fifteen inch FENDER special design driver, BXR-410 with four ten inch FENDER special design drivers or the BXR SPECTRUM, employing one eighteen inch and two ten inch FENDER special design drivers and a BI-AMP ready crossover network. That is why we say, proudly...FENDER, The Sound That Creates Legends. WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR MOISTURE.