Fender Elite Series Precision Bass I amp II Owners Manual - Page 12
periodically
View all Fender Elite Series Precision Bass I amp II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
As you sight down the neck from the headstock, if it is too concave, turn the wrench clockwise. If it is too straight or convex, turn the wrench counterclockwise while periodically checking the gap with the feeler gauge. Repeat the same check using the first string. Periodically re-check tuning for standard pitch. If the nut feels loose and the neck is still not correctly adjusted, continue turning the wrench counterclockwise until you begin to feel some resistance. If extreme resistance is felt while adjusting in either direction, do not continue adjusting. Take the instrument to the nearest authorized Fender dealer or service center for inspection. 3. Set Bridge Height The recommended string clearance at the twelfth fret should be: Strings 1-4 3132" ± 1/64" itit Set Pickup Height Depress all strings-at the last fret. Check the distance from the bottom of the first and fourth strings to the top of the pickup surface. The measurement should be as follows: Strings 1-4 3/32" 5. Set Nut Height The string clearance at the first fret should be as follows: All Strings .020"-.024" 10