Fender Elite Series Precision Bass I amp II Owners Manual - Page 6
Fender Elite Series Precision Bass I amp II Manual
View all Fender Elite Series Precision Bass I amp II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
separate Volume Control for each pickup allowing you to mix the sound from the individual pickups when they are used together. TONE CONTROL The Precision Bass I has a unique tone circuit that features Fender's new TBV" Tone Control (Pat. pending). The TI3XTM Control has a center detent position that provides the standard Fender sound. By rotating the knob clockwise, you will notice increased presence and brightness. Rotating the control from the detent position, counterclockwise, it works like a normal tone control. The Precision Bass II Tone Control, with its dual potentiometer, is assignable to either or both of the two pickups by means of the Tone Assign Switch. ADJUSTABLE PICKUPS The pickups on your Fender Elite Series bass are fully adjustable for height and matched string volume. Adjustments are made by turning the Pickup Adjustment Screws located at either end of the pickups. The relative volume of any string may be adjusted by raising or lowering the end of the appropriate pickup section. To raise a pickup section, turn the adjustment screws counterclockwise; to lower, turn the screw clockwise. The recommended string clearance (31321 is measured between the pickup and the bottom of each string when fretted at the highest fret. 4