Fender Mustangtrade GT 100 Mustang™ GT 100 Owner s Manual - English - Page 8

If an edited setting is not saved, the preset will revert to its previous settings when returning to the preset after leaving it, or when turning the amplifier off and back on again. To save a preset edit, press the illuminated SAVE utility button to get three options (see illustration below): SAVE (keep preset as edited), RENAME (save preset with a new name in its current position) and SAVE AS NEW (save preset in a new position with a new name). Turn the ENCODER to highlight an option; press it to select one. SAVE RENAME SAVE AS NEW SAVE To enter a new preset name after choosing RENAME or SAVE AS NEW, use the ENCODER to spell out a new name of your choice. Press the ENCODER once to activate the cursor; turn it to choose a character (see illustration below). Press ENCODER again to enter that character and move to the next. Repeat until new name is complete; press the SAVE utility button to keep completed new name, or press the top LAYER button (corresponding with onscreen prompt "back") to return to the previous screen. Note that when choosing SAVE AS NEW, the preset will be saved in the next available open position ("101" in the illustration below). 101 back NEW PRESET NAME X SAVE EDITING PRESET AMPLIFIER CONTROL KNOB SETTINGS As noted in the "Control Panel" section above, users can change a preset's amplifier control knob settings by turning the physical control knobs on the top panel (except for Master Volume). This synchronizes the modified settings of the physical control knobs with their corresponding digital counterparts. These settings can also be changed by editing the digital control knob positions within the CONTROLS LAYER, which displays the controls specific to the amp in use. To do this, first access the CONTROLS LAYER by pressing its LAYER BUTTON (see illustration below). ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB Press the bottom LAYER BUTTON to access the CONTROLS LAYER for the amp model within the preset. 6