Fender Mustangtrade GT 100 Mustang™ GT 100 Owner s Manual - English - Page 9

Once in the CONTROLS LAYER, turn and press the ENCODER to scroll through and select a specific digital amp control knob. Then turn the ENCODER again to change that control's setting. When a control setting is changed, the box containing the preset number changes from blue to red (indicating that a preset edit has been made), and the SAVE utility button illuminates. With the new control setting in place, further edits can then be made or the SAVE utility button can be pressed to keep completed edits (see illustrations below). ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB Turn the ENCODER to scroll among amp model control knobs. ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB Press the ENCODER to select an amp model control knob for adjustment. ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB Turn the ENCODER again to adjust the selected amp model control knob to preference. Additional amp and control settings can be found by continuing to scroll through the CONTROLS LAYER of various amp models within the presets. These consist of "deeper" parameters including sag, bias and gate controls. Different speaker cabinet models are also included. Scroll through, select, adjust and save these additional parameters in the same manner described directly above (see illustrations below). ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB '65 TWIN CAB OFF GATE PRE MATCH 0.0% POS SAG BIAS Close-up detail showing additional amp and control settings found in the CONTROLS LAYER; in this case for the Twin Reverb amp model. ROCK & ROLL FUZZ AMPLIFIER TWIN REVERB REVERB '65 TWIN CAB OFF GATE PRE MATCH POS SAG 0.0% BIAS Scroll among, select and adjust additional CONTROLS LAYER amp and control settings using the ENCODER. 7