Fisher and Paykel E522BRXFDU User Guide - Page 45
Measured Fill
View all Fisher and Paykel E522BRXFDU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Troubleshooting 43 Problem Possible causes What to do EN Water has poor taste/odor. Refrigerator not used for an extended period. Dispense 10 qt (10 L) water so fresh water supply is replenished. Water dispenser does not work and/or icon flashing. Water in first glass is warm. Filter warning light is flashing. Measured Fill amount of water is inaccurate. Drips overflow drip-shelf. Water flow rate has slowed down. Water supply turned off or not connected. Supply line may be blocked. On first installation there may be air in water system. Filter may be blocked and need replacing. Dispenser lock activated. Water frozen in tank. Water dispenser not used for extended period. Tank capacity used recently. Filter needs replacing. Measured Fill needs recalibration. Air trapped in tank. New filter installed. Filter cartridge is restricted. Turn water on. Press dispenser for 1 minute to remove trapped air from water line and to fill the water system. Check supply for kinks or leaks. To remove air, run a liter or a quart of water through the dispenser. Replace filter (see back of this booklet for Customer Care contact details). Hold down the and button for 2 seconds. Increase temperature to a warmer setting in fresh food compartment and freezer. Discard first glass of water dispensed. Allow water time to cool. Replace filter as soon as possible (refer to pages 28 - 29). Recalibrate (refer to page 30). Flush 3 qt (3 L) water through dispenser, stopping intermittently. Flush 3 qt (3 L) water through filter and then 3 qt (3 L) through dispenser. Replace water filter as soon as possible (refer to pages 28-29).