Fisher and Paykel E522BRXFDU User Guide - Page 7
Installation instructions
View all Fisher and Paykel E522BRXFDU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Contents of filter kit 1 13 ft (4 m) white ¼" (6 mm) tubing 2 1 x 8" (200 mm) blue tubing 3 1 x pressure reducing valve (PRV) 4 1 x double sided tape 5 2 x locking keys 6 1 x water filter cartridge and head 7 1 x faucet connection Installation instructions 5 EN 1 2 3 4 5 6 7 Fig.2 Water connection kit Important! It is imperative the pressure reducing valve (PRV) is fitted prior to the filter. This valve ensures the water will not flow back into the mains from the refrigerator water system. If the PRV is not fitted to the connection line your Ice & Water refrigerator features may not function in some circumstances. It is recommended that an authorised plumber in your state or town is used to install the water connection. The new tubings supplied with the refrigerator are to be used, old tubings from old Ice & Water connections should not be used. Installation precautions/warning DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. WARNING - connect to potable water supply only. DO NOT install on line pressure above 130 psi (900 kPa) or below 22 psi (150 kPa). DO NOT use on hot water supply (100°F [38°C max.]). DO NOT install near electrical wires or water pipes that will be in the path of drilling when selecting the location of filter system. DO NOT mount filter in such a position so that it will be struck by other items, such as wastebaskets, etc. DO NOT install the filter in direct sunlight as prolonged exposure to light can weaken plastic components. DO NOT install in a location that is susceptible to freezing temperatures as damage to the housing could occur. DO NOT screw filter to the refrigerator. AVOID contamination of pipes during installation. DO NOT use copper tubing. The plastic tubing supplied should always be used.