Fisher and Paykel OR30SDI6X1 User Guide - Page 65
Failure to disconnect the range from the power supply may result in death or
View all Fisher and Paykel OR30SDI6X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CARE AND CLEANING Replacing an oven light bulb IMPORTANT! Use a 25W, 120V 60HZ G9 halogen bulb for replacement. Do not use a standard light bulb in any oven, the heat will break it. 1 Allow the oven (including the lamp cover and the bulb) to cool completely. 2 Remove any shelves that may get in the way. 3 Remove the door if the lamp will be hard to reach. 4 Turn the power supply to the range off at the main fuse or circuit breaker panel. If you don't know how to do this, contact an electrician. IMPORTANT! Failure to disconnect the range from the power supply may result in death or electrical shock. 5 Remove the lamp cover. yy Upper lights: wearing a rubber glove to improve grip turn the cover counter- clockwise to unscrew yy Side lights: wearing a rubber glove to improve grip, hold the cover and prise out using finger nails on other hand. If this does not work place a thin plastic spatula between the cover and cavity wall and gently twist to prise the cover off. Take care not to chip the glass covers or to damage the enamel finish inside the oven. 6 Remove the faulty bulb. 7 Holding the replacement bulb in a soft cloth or tissue insert it into the socket. Do not touch the bulb with your fingers. 8 Replace the lamp cover. yy Upper lights: turn the cover clockwise to tighten and then back a quarter turn. 9 Turn the power supply to the range back on at the main fuse or circuit breaker panel. Upper lamp cover Upper lamp cover Light bulb Upper lamp cover Light bulb OR30 Models Side lamp cover OR36 Models Light bulb Upper lamp cover Side lamp cover 63