Fisher and Paykel OR30SDI6X1 User Guide - Page 76
Alert Code, Possible Causes, What To
View all Fisher and Paykel OR30SDI6X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
ALERT CODES ALERT CODE A1 A2 A3 F2 F + number POSSIBLE CAUSES The oven has overheated. Door lock error: the door cannot be locked after you have started a Self Clean cycle. Door lock error: the door cannot be unlocked after a Self Clean cycle has finished. Technical fault. WHAT TO DO 1 Allow the oven to cool down. 2 Once the oven has cooled down and the door has unlocked, the alert code will disappear. You can now use the oven again. 1 Turn the power to the oven off at the wall and on again. 2 Wait approximately 10 seconds. This is to allow the door lock to return to its initial position. 3 Set the clock. See 'Setting the clock and first use' for instructions. 4 Try starting a Self Clean cycle again, making sure that you close the door firmly. See 'Using the Self Clean function'. 1 Turn the power to the oven off at the wall and on again. 2 Try touching on the oven door to help the door lock disengage. 3 If this doesn't help and the alert code reappears, call your Fisher & Paykel trained and supported service technician or Customer Care. 1 Note down the alert code. 2 Wait until the cooling fans have stopped and the oven has completely cooled down. 3 Turn the power to the oven off at the wall. 4 Call your Fisher & Paykel trained and supported service technician or Customer Care with the alert code information. 74