Fisher and Paykel OR36SCI6X1 User Guide - Page 76
ALERT CODE, POSSIBLE CAUSES, WHAT TO DO, the door lock disengage.
View all Fisher and Paykel OR36SCI6X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
ALERT CODES ALERT CODE A1 A2 A3 F2 F + number POSSIBLE CAUSES The oven has overheated. Door lock error: the door cannot be locked after you have started a Self Clean cycle. Door lock error: the door cannot be unlocked after a Self Clean cycle has finished. Technical fault. WHAT TO DO 1 Allow the oven to cool down. 2 Once the oven has cooled down and the door has unlocked, the alert code will disappear. You can now use the oven again. 1 Turn the power to the oven off at the wall and on again. 2 Wait approximately 10 seconds. This is to allow the door lock to return to its initial position. 3 Set the clock. See 'Setting the clock' for instructions. 4 Try starting a Self Clean cycle again, making sure that you close the door firmly. See 'Using the Self Clean function'. 1 Turn the power to the oven off at the wall and on again. 2 Try touching on the oven door to help the door lock disengage. 3 If this doesn't help and the alert code reappears, call your Fisher & Paykel trained and supported service technician or Customer Care. 1 Note down the alert code. 2 Wait until the cooling fans have stopped and the oven has completely cooled down. 3 Turn the power to the oven off at the wall. 4 Call your Fisher & Paykel trained and supported service technician or Customer Care with the alert code information. 74