Fluke 1000FLT Product Manual - Page 16
Pin Test, Table 6. Pin Test, Description
View all Fluke 1000FLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Shop for Fluke products online at: www. 1000FLT Users Manual Pin Test The Pin Test feature checks the continuity of the filament between the pins. This is the default function when the Product is turned on. Make sure all other functions are off before you do a Pin Test. should be the only button that is lit. To test (see Table 6): 1. Turn on the Product. 2. Insert the lamp pins into the slots on the Product . The green LED test indicator shows the filament is good . You will hear a continuous beep if it is on. No color on the LED test indicator shows that the filament is broken . Table 6. Pin Test 1 2 3 Item LED no LED solid green no LED Description huz06.eps Ready for Pin Test, default mode Filament is good, continuous beep if the beeper is on Filament is broken MyFlukeStore.com 1.888.610.7664 10