Fluke 1000FLT Product Manual - Page 8
performing the LAMP TEST. While the LAMP, When using VoltAlert - user manual
View all Fluke 1000FLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Shop for Fluke products online at: www. 1000FLT Users Manual • When using VoltAlert, if the test indicator does not glow or the beeper does not sound, hazardous voltage could still be present. VoltAlert indicates active voltage in the presence of electric fields of sufficient strength generated by the source (MAINS) voltage. If the field strength is low, the Product may not provide indication of hazardous voltages. Lack of an indication may occur if the Product is unable to sense the presence of voltage which may be influenced by several factors including, but not limited to: - Shielded wire/cables - Adjacent grounded conductors - Thickness and type of insulation - Distance from the voltage source - Fully-isolated users that prevent an effective ground - Receptacles in recessed sockets and/or differences in socket design - Condition of the Product and batteries • Use the Product only as specified, or the protection supplied by the Product can be compromised. • Do not use the Product around explosive gas, vapor, or in damp or wet environments. • Do not use the Product if it operates incorrectly. • Disable the Product if it is damaged. • Keep fingers behind the finger guards on the Product. • Do not connect directly to mains. • Close and lock the battery door before you operate the Product. • Do not allow the rod extender to contact live voltage source. • Do not touch the rod extender while performing the LAMP TEST. While the LAMP TEST source voltage is not considered hazardous for electric shock or electric burn, the source can cause mild pain or surprise. • For use by competent personnel only. MyFlukeStore.com 1.888.610.7664 2