Fluke 107 ESP Product Manual - Page 17

Measure Resistance, Test for Continuity

Get Fluke 107 ESP PDF manuals and user guides View all Fluke 107 ESP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

106/107 Users Manual Measure Resistance 1. Turn the rotary switch to  (106 does not have ). Make sure power is disconnected from the circuit to be measured. 2. Connect the red test lead to the  terminal and the black test lead to the COM terminal. 3. Measure the resistance by touching the probes to the desired test points of the circuit. 4. Read the measured resistance on the display. Test for Continuity With the resistance mode selected, push the YELLOW button once to activate the continuity mode. If the resistance is

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
106/107
Users Manual
16
Measure Resistance
1.
Turn the rotary switch to
(106 does not have
). Make sure power is disconnected
from the circuit to be measured.
2.
Connect the red test lead to the
terminal and the black test lead to the
COM
terminal.
3.
Measure the resistance by touching the probes to the desired test points of the circuit.
4.
Read the measured resistance on the display.
Test for Continuity
With the resistance mode selected, push the
YELLOW
button once to activate the continuity
mode. If the resistance is <70
Ω
, the beeper sounds continuously, designating a short circuit.
If the Product reads
, the circuit is open.
Shop for Fluke products online at:
1.888.610.7664
www.
MyFlukeStore
.com