Fluke 107 ESP Product Manual - Page 23
Test the Fuse, Replace Batteries and the Fuse
View all Fluke 107 ESP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
106/107 Users Manual Test the Fuse 1. Turn the rotary switch to (106 does not have ). 2. Plug a test lead into the terminal and touch the probe to the A terminal. • A good A terminal fuse is indicated by a reading less than 0.1 Ω. • If the display reads , replace the fuse and test again. • If the display shows any other value, have the Product serviced. See Service and Parts. Replace Batteries and the Fuse To replace the batteries or the fuse, see Figure 5. Caution Be sure to observe Electro Static Discharge precautions. 22 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664
106/107
Users Manual
22
Test the Fuse
1.
Turn the rotary switch to
(106 does not have
).
2.
Plug a test lead into the
terminal and touch the probe to the
A
terminal.
•
A good
A
terminal fuse is indicated by a reading less than 0.1
Ω
.
•
If the display reads
, replace the fuse and test again.
•
If the display shows any other value, have the Product serviced. See
Service and
Parts
.
Replace Batteries and the Fuse
To replace the batteries or the fuse, see Figure 5.
Caution
Be sure to observe Electro Static Discharge precautions.
Shop for Fluke products online at:
1.888.610.7664
www.
MyFlukeStore
.com