Fluke 123B/S Service Manual - Page 84
From the VIDEO TRIGGER, Select the following test tool setup
View all Fluke 123B/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
123/124 Service Manual PAL310.BMP Figure 4-11. Test Tool Screen for PAL/SECAM line 310 NTSC262.BMP Figure 4-12. Test Tool Screen for NTSC line 262 7. Apply the inverted TV Signal Generator signal to the test tool. You can invert the signal by using a Banana Plug to BNC adapter (Fluke PM9081/001) and a Banana Jack to BNC adapters (Fluke PM9082/001), as shown in Figure 4-13. Figure 4-13. Test Tool Input A to TV Signal Generator Inverted ST8142.WMF 8. Select the following test tool setup: • Press to open the SCOPE INPUTS menu. • Press to open the TRIGGER menu and choose: I VIDEO on A The VIDEO TRIGGER sub-menu is shown now. From the VIDEO TRIGGER menu choose: SYSTEM: I NTSC or I PAL or I SECAM or I PALplus | LINE: I SELECT | • POLARITY: I NEGATIVE • Using set the Input A sensitivity to 200 mV/div. • Using select 20 µs/div. 4-26