Fluke 287 Fluke 287 and 289 Multimeter Users Manual - Page 77
Detailed Specifications, Electromagnetic Compatibility Standards EMC, Certifications, Accuracy - calibration
View all Fluke 287 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
True-rms Digital Multimeters Detailed Specifications Electromagnetic Compatibility Standards (EMC) European EMC EN61326-1 Australian EMC N10140 US FCC FCC CFR47: Part 15 CLASS A Certifications UL, CE, CSA, ; (N10140), s Detailed Specifications Accuracy: Accuracy is specified for a period of one year after calibration, at 18 °C to 28 °C (64 °F to 82 °F), with relative humidity to 90 %. Accuracy specifications are given as: ±( [ % of reading ] + [ number of least significant digits ] ). Accuracy specification assumes ambient temperature stable at ±1 °C. For ambient temperature changes of ±5 °C, rated accuracy applies after 2 hours. To obtain full accuracy in DC mV, Temperature, Ohms and Lo (50) Ohms, let the meter stabilize 20 minutes after using LoZ. True-rms: AC mV, AC V, AC μA, AC mA, and AC A specifications are ac-coupled, true rms, and are specified from 2 % of range to 100 % of range, except 10 A range is specified from 10 % to 100 % of range. Crest Factor: Accuracy is specified with AC crest factor ≤ 3.0 at full-scale, increasing linearly to 5.0 at half-scale, except the 1000 V range, where it is 1.5 at full scale, increasing linearly to 3.0 at half-scale and 500 mV and 5000 μA, where it is ≤3.0 at 80 % of full scale, increasing linearly to 5.0 at half-scale. For non-sinusoidal waveforms add ±(0.3 % of range and 0.1 % of reading). AC Floor: When the input leads are shorted together in the ac functions, the Meter may display a residual reading up to 200 counts. A 200 count residual reading will cause only a 20 count change for readings at 2 % of range. Using REL to offset this reading may produce a much larger constant error in later measurements. AC+DC: AC+DC is defined as ac2 + dc2 67