Fluke 381 Fluke 381 Users Manual - Page 8

the Flexible Current Probe. - meters

Get Fluke 381 PDF manuals and user guides View all Fluke 381 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

381 Users Manual • Use extreme caution when working around bare conductors or bus bars. Contact with the conductor could result in electric shock. • Adhere to local and national safety codes. Individual protective equipment must be used to prevent shock and arc blast injury where hazardous live conductors are exposed. • When measuring, keep fingers behind the Tactile Barrier. See Figure 2. • Disconnect circuit power and discharge all high-voltage capacitors before you do diode tests or measure resistance, continuity, or capacitance. • Do not measure ac/dc current in circuits carrying more than 1000 V or 1000 A with the Meter Jaw. • Never operate the Meter with the back cover removed or the case open. • Do not measure ac current in circuits carrying more than 1000 V or 2500 A with the Flexible Current Probe. • Do not apply the Flexible Current Probe around or remove from HAZARDOUS LIVE conductors. • Take special care during fitting and removal of the Flexible Current Probe. De- energize the installation under test or wear suitable protective clothing. WCaution To avoid possible damage to the Meter or to equipment under test: • Use the proper jacks, function, and range for the measurement application. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
381
Users Manual
4
•
Use extreme caution when working around bare conductors or bus bars. Contact
with the conductor could result in electric shock.
•
Adhere to local and national safety codes. Individual protective equipment must
be used to prevent shock and arc blast injury where hazardous live conductors
are exposed.
•
When measuring, keep fingers behind the Tactile Barrier. See Figure 2.
•
Disconnect circuit power and discharge all high-voltage capacitors before you
do diode tests or measure resistance, continuity, or capacitance.
•
Do not measure ac/dc current in circuits carrying more than 1000 V or 1000 A
with the Meter Jaw.
•
Never operate the Meter with the back cover removed or the case open.
•
Do not measure ac current in circuits carrying more than 1000 V or 2500 A with
the Flexible Current Probe.
•
Do not apply the Flexible Current Probe around or remove from HAZARDOUS
LIVE conductors.
•
Take special care during fitting and removal of the Flexible Current Probe. De-
energize the installation under test or wear suitable protective clothing.
W
Caution
To avoid possible damage to the Meter or to equipment under test:
•
Use the proper jacks, function, and range for the measurement application.