Fluke 438-II/BASIC User Manual - Page 9
Motor Analyzer, Table 5. Motor Design Type and Characteristics Summary
View all Fluke 438-II/BASIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Motor Analyzer Motor Setup Motor Design Starting Current Starting Torque Breakdown Torque Table 5. Motor Design Type and Characteristics Summary NEMA-A NEMA-B NEMA-C NEMA-D NEMA-E IEC-H High Medium Medium Medium Medium Medium Medium Medium High Very High Medium High High Medium High Very High Medium High IEC-N Medium Medium Medium Table 6. Nameplate Settings and Ranges Required from motor nameplate Rated Power Rated Speed Direct on Line VSD Rated Voltage 50 Hz motors 60 Hz motors Rated Current Rated Frequency Rated Cos Q (DPF) Rated Service Factor Motor Design Type 746 W to 746 kW 1 hp to 1000 hp Range 300 rpm to 3600 rpm 800 rpm to 3600 rpm 170 V to 1000 V 208 V to 1000 V 1 A to 1500 A 50 Hz or 60 Hz 0.01 to 1.00 1.00 to 1.50 NEMA-A, NEMA-B, NEMA-C, NEMA-D, NEMA-E, IEC-H, IEC-N, Other Resolution 1 W to 1 kW 1 hp 1 rpm 1 V 0.1 A - - - 0.01 0.01 - - - Default values are available for the nameplate settings and ranges. Use (UNIT SETUP) to open the setup screen to configure these values. The selection depends on the default motor frequency. Softkeys: Select UNIT SETUP screen Select TREND SETUP screen Select DEFAULTS for the MOTOR SETUP screen START measurements Opens the Motor Analyzer Function Preference screen. Select metric or imperial units for the mechanical motor power, torque, and the default motor frequency. Adjusts the duration of the automatic trend recording. The default duration is 7 days. Sets the default values defined in the Function Preferences screen (see UNIT SETUP). The defaults depend on the default motor frequency. Starts the Motor Analyzer function. See Motor Analyzer Parameters on page 8. 5