Fluke 54-II-B Product Manual - Page 18

Displaying Temperatures, Holding the Displayed Temperatures, Viewing the MIN, MAX, and AVG Readings

Get Fluke 54-II-B PDF manuals and user guides View all Fluke 54-II-B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

53IIB/54IIB Users Manual Displaying Temperatures 1. Press  to select the correct temperature scale. 2. Hold or attach the thermocouple(s) to the measurement location. The temperature reading appears in the selected display. 3. Model 54: Press  to toggle between showing the T1, T2, and T1-T2 reading in the primary or secondary display. Notes The display shows "- - - -" when a thermocouple is not connected. The display shows  (overload) when the temperature being measured is outside the thermocouple's valid range. Model 54: If only thermocouple T2 is connected, the T2 reading appears in the primary display. Holding the Displayed Temperatures 1. Press  to freeze the readings on the display. The display shows . 2. Model 54: Press  to toggle showing the T1, T2, or T1-T2 readings in the primary or secondary display. 3. Press  again to turn off the HOLD function. Viewing the MIN, MAX, and AVG Readings 1. Press  to step through the maximum (MAX), minimum (MIN), or the average (AVG) readings. The elapsed time since entering MIN MAX mode, or the time at which the minimum or maximum occurred, appears on the display. 2. Press ,  (CANCEL) to exit MIN MAX mode. 14 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
53IIB/54IIB
Users Manual
14
Displaying Temperatures
1.
Press
to select the correct temperature scale.
2.
Hold or attach the thermocouple(s) to the
measurement location.
The temperature reading appears in the selected
display.
3.
Model 54:
Press
to toggle between showing the
T1, T2, and T1-T2 reading in the primary or
secondary display.
Notes
The display shows "- - - -" when a thermocouple
is not connected.
The display shows

(overload) when the
temperature being measured is outside the
thermocouple's valid range.
Model 54: If only thermocouple T2 is connected,
the T2 reading appears in the primary display.
Holding the Displayed Temperatures
1.
Press
to freeze the readings on the display.
The display shows
.
2.
Model 54:
Press
to toggle showing the T1, T2, or
T1-T2 readings in the primary or secondary display.
3.
Press
again to turn off the HOLD function.
Viewing the MIN, MAX, and AVG Readings
1.
Press
to step through the maximum (MAX),
minimum (MIN), or the average (AVG) readings.
The elapsed time since entering MIN MAX mode, or
the time at which the minimum or maximum occurred,
appears on the display.
2.
Press
,
(CANCEL) to exit MIN MAX mode.
Shop for Fluke products online at:
1.888.610.7664
www.
MyFlukeStore
.com