Fluke 87V-MAX Product Manual - Page 18
The High Accuracy MIN MAX Recording mode has a, Before selecting Peak MIN MAX, select DC voltage or
View all Fluke 87V-MAX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
again to return to the maximum (MAX) reading. To reset the Peak MIN MAX mode press Ttwice: the first press exits the mode, and the second press re-enters the mode. To completely exit the MIN MAX mode, press Mfor one second. In Peak MIN MAX mode, the present reading, average (AVG) readings, and analog display are not displayed. Before selecting Peak MIN MAX, select DC voltage or current to DC couple the input waveform; or AC voltage to capacitively couple the input waveform. Peak MIN MAX works in all functions except ohms, frequency and capacitance. In the MIN MAX Recording mode, press Ito stop the recording of readings; press again to restart recording. If recording is stopped, the minimum, maximum, average, and present values are frozen, but the analog display continues to be active. When recording is stopped, the stored readings are not erased and you can still scroll through these readings. Power-On Option: Select High Accuracy MIN MAX Recording The High Accuracy MIN MAX Recording mode has a response time of approximately 1 second. Changes of How to Use the Meter more than 1 second duration are recorded. The "1 s" annunciator is turned on. In the Frequency Counter mode, readings are always recorded at the high accuracy recording speed; the response time is not selectable. I KManual Ranging Press Kto select the Manual Range mode and turn off the AUTO annunciator. (The meter remains in the range it was in when manual ranging was selected.) In the Manual Range mode, each time you press Kbutton, the range (and the input range annunciator) increments, and a new value is displayed. If you are already in the highest range, the meter "wraps around" to the lowest range. (In the Frequency Counter mode, pressing Kmanually selects the input voltage or current range.) To exit the Manual Range mode and return to autoranging, Press and hold down Kfor 2 seconds. The AUTO annunciator turns back on. When the range is changed manually, the Touch Hold, MIN MAX Recording, and REL[ative] modes are disabled. 11 MyFlukeStore Find QuaSlhitoypPforordFulucktespOrondliuncetsato:nline awt:ww.wGwlo. balTestSupply.com.com [email protected]