Fluke Ti300 User Manual - Page 28
Fast Auto/Manual Range Toggle, Fast Auto Rescale in Manual Mode
View all Fluke Ti300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Ti200, Ti300, Ti400 Users Manual Fast Auto/Manual Range Toggle When NOT in a menu mode, push and release to toggle between Auto Range and Manual Range. The icon in the upper right-hand corner of the LCD screen will indicate the change by saying Auto or Manual. Fast Auto Rescale (in Manual Mode) When in Manual Range and NOT in a menu mode, push and release to automatically rescale the level and span range for objects in the thermal field of view. This feature operates the Imager in a semi-automatic mode if manual fine re-adjustment of level and span with the arrow buttons is not necessary. Rescaling can be done as often, or as little, as needed. Note The Imager always powers up in the same Level and Span mode, Auto or Manual, as when it was powered down. Temperature Level for Manual Operation Mode When put into manual ranging, the level setting moves the thermal span up or down within the total temperature range. See Figure 4. In the live manual mode, the arrow buttons are always available to adjust the level and span. To set the level: 1. Push to move the range to a higher temperature level. 2. Push to move the range to a lower temperature level. While you adjust the manual level, the scale along the right side of the display shows the thermal span as it moves to different levels within the total range. 22