Fluke TiS55 Product Manual - Page 25
Delta-T, Spot Box
View all Fluke TiS55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TiS55+/TiS75+ Users Manual Delta-T Use Delta-T to set the center point or a spot marker to use as a temperature reference mark. The other markers will show the temperature difference from the reference point. At least one marker must be on to use the Delta-T feature. To set a temperature reference mark: 1. Select m > Markers > Delta-T. 2. Select the marker to use as the reference, or select the Center Point. [The temperature shows next to the reference mark Δ The temperature difference relative to the temperature of the reference mark shows next to the other spot markers. Note If you only have one marker, the reference marker is the Center Point. The Center Point can be a temperature reference mark, but it cannot be the delta point. It is either the main reference mark or it is not a delta reference at all. Spot Box Use the Spot Box feature to set a temperature measurement zone (box) to center on the target and to adjust the sizes or position of the box. The box expands or contracts to different levels within the infrared image. The box shows an approximate maximum (MAX), average (AVG), and minimum (MIN) temperature measurement in that area. To set a spot box: 1. Select m > Spot Boxes. 2. Select the number of Spot Boxes. A white box shows on the display. a toggles between Size and Position. 3. If necessary, push a to select Size. ; shows on the display. 4. Drag to increase or decrease the size of the Spot Box. Or, Push: • W to decrease the vertical size. • X to increase the vertical size. 20 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664