Foscam FI8909W-NA User Manual - Page 17
For Visitor
View all Foscam FI8909W-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
WWW.FOSCAM.COM 2.4 For Visitor For IE browser FI8909W User Manual Figure 2.18 Multi-device window: The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-device settings. OSD: OSD is used to add timestamp on the video. There are five text colors to choose from. Add timestamp on record: Select this option if you want to add a timestamp to recordings. Alarm sound off: Select this option, to mute the beep alarm sound when motion is detected. Audio buffer: Audio buffer with units set as number of seconds. : When you enable motion alarm, the camera will record automatically and store the recording file to the folder you configured. This icon is used to control whether the folder opens or not.. : When you click this icon, the camera video will be enabled. : When you click this icon, the camera video will be disabled. : When you click this icon, a still image will be available to save as a JPG : When you click this icon, the camera will begin continuous recording and store the .avi file to the folder you configured. (Figure 3.3) Click again to stop. : Click the headphone icon and you will hear sound captured by the camera's built-in microphone. You may need to plug earphones or enable the computer speakers to hear from the camera's microphone.. Shenzhen Foscam Intelligent Technology Co., Limited 15 Tel: 86 755 2674 5668 Fax: 86 755 2674 5168