Foscam FI8909W-NA User Manual - Page 22
Multi-Device Settings
View all Foscam FI8909W-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
WWW.FOSCAM.COM FI8909W User Manual Figure 3.3 Here you can also set two important file locations for the camera, the Record Path, and the Alarm Record Path. Simply click Browse and choose the path to the required folder. The Record Path location is used to store manually recorded files (Click record icon. Figure 2.18) and still images The Alarm Record Path location is used to store automatically recorded files when the camera is activated by motion. (See set motion alarm. Figure 3.30) The default path for Record Path and Alarm Record Path is C:\Documents and Settings\All Users\Documents. NOTE: In Windows7 or Vista, if you cannot set the paths.: Windows7 or Vista's security level is higher than Windows XP/2000.For "set record path" function, user should add the Device IP address to the Internet Explorer's 'Trusted sites' first. The step is: IE browserÆToolÆInternet ProperÆSecurityÆTrusted sitesÆSitesÆAdd 3.4 Multi-Device Settings The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. 3.4.1 Add cameras in LAN In the Multi-Device Settings page, you can see all devices found on the LAN. The 1st Device is the default one. You can add more cameras to the list on the LAN for monitoring. The camera's software supports up to 9 IP Cameras online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, The Alias, Host and Http Port will be filled in the boxes below automatically. Enter the correct username and password then click Add. Add more cameras in Shenzhen Foscam Intelligent Technology Co., Limited 20 Tel: 86 755 2674 5668 Fax: 86 755 2674 5168