Foxconn AT-5570 User manual - Page 15

BIOS SETUP Select [Yes] to exit setup utility and reset computer without saving your modifications, select [No] or to return to the main menu. ► Save Changes If you select this option and press , a message will be displayed in the center of the screen. Select [Yes] to save your changes, select [No] or to return to the main menu. ► Discard Changes If you select this option and press , a message will be displayed in the center of the screen. Select [Yes] to discard your modifications, select [No] or to return to the main menu. ► Restore Defaults Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values. Select this option and press Enter, it will pop out a dialogue box to let you load the defaults. Select and then press to load the defaults. Select and press , it will not load. By this default, BIOS have set the optimal performance parameters of system to improve the performances of system components. But if the optimal performance parameters to be set cannot be supported by your hardware devices (for example, too many expansion cards were installed), the system might fail to work. ► Save as User Defaults If you select this option and press , a message will be displayed in the screen. Select [Yes] to save the changes done so far as user defaults, select [No] or to return to the main menu. ► Restore User Defaults If you select this option and press , a message will be displayed in the screen. Select [Yes] to restore/load the user defaults to all the setup options, select [No] or to return to the main menu. ► Boot Override BIOS auto detect the presence of connected devices, select the device you want to boot from and press , then the system will directly boot from the selected devices. 22 Install OS ■ Install Windows 7/8 ■ Install Drivers